Synthetic Gear Lubricant
BENEFITS
- Has tremendous shock load and E.P. properties
- Dramatically reduces operating temperatures
- Outstanding oxidation resistance - long life at high racing temperatures
- Powerful antioxidants, anti foam agents and corrosion inhibitors to protect against contaminants
- Very low volatility - stays in grade, resists thinning and thickening
- Very High Viscosity Index - extra wear protection at high temperatures
- Excellent rust protection & deposit control - keeps gears clean
- Outstanding water separation - helps to reduce wear & maintain film strength
- Is compatible with most manual transmissions, rear ends and quick changes
Material Safety Data Sheet
Download Material Safety Data Sheet PDF
| SECTION 1 | COMPANY IDENTIFICATION AND CHEMICAL PRODUCT |
| Company/Manufacturer Name: | Advanced Technology Lubricants, Inc. |
| Address: | 5889 Airport Road, Ste# 1426,Port Orange, FL 32128 |
| Phone / Fax: | Phone 386-322-1666 Fax 386-322-0509 |
| Trade Name: | SGL |
| Chemical Name: | Synthetic Hydrocarbon |
| Chemical Family: | Synthetic Hydrocarbon |
| Formula: | Proprietary |
| CAS#: | Proprietary |
| Applications: | SGL is for use as a gear lubricant. |
| SECTION 2 | COMPOSITION / INFORMATION ON INGREDIENTS |
| General: | This Product is NON-HAZARDOUS. The product contains No Known Carcinogens. No Special Warning Labels Are Required Under OSHA 29 CFR 1910.1200. |
| FDA Statement: | N / A |
| SECTION 3 | HAZARDS IDENTIFICATION |
| Appearance: | Clear liquid, Very slight yellow tint. |
| Known Hazards: | This product does not require any special warning labels under OSHA 29 CFR 1910.1200 and contains no known hazardous ingredients. |
| SECTION 4 | FIRST AID MEASURES |
| Eyes: | Flush with clean, lukewarm water (low pressure) occasionally lifting eyelids. Physician assessment if eyes are inflamed. |
| Skin: | Wash affected areas thoroughly with soap and water. Wash contaminated clothing before reuse. |
| Inhalation: | Avoid breathing oil mists. Remove to fresh air. Give artificial respiration if not breathing. Oxygen may be given by qualified personnel if breathing is difficult. Get medical attention. |
| Ingestion: | Do not induce vomiting. Force fluids. Has laxative effect. |
| SECTION 5 | FIRE FIGHTING MEASURES |
| Flash Point: | 450 °F min |
| Flammable Limits: | N/A |
| Auto Ignition Temp: | N/A |
| Fire & Explosive Hazards: | LOW FIRE HAZARD - Do not cut, drill, or weld empty containers |
| Extinguishing Media: | Dry chemical foam, water spray, carbon dioxide for small fires |
| Fire Fighting Procedures: | Contain liquid, cover with extinguishing agent, use water spray to cool fire exposed containers and as protective screen. Do not point solid water stream directly into burning fluid to avoid spreading. |
Technical Data
TYPICAL PROPERTIES
| LUBRICANT DESIGNATION | SGL 100 | SGL 150 | SGL 220 | SGL 320 | SGL 460 | SGL 680 | SGL 1000 |
| Viscosity Index |
115 |
121 |
125 |
126 |
129 |
130 |
131 |
| Viscosity cSt @ 40°C |
95 |
140 |
200.1 |
291 |
420 |
630 |
910 |
| Viscosity cSt @ 100°C |
11.8 |
16.1 |
21.1 |
27.5 |
36.3 |
48.5 |
62.5 |
| Flash Point °F |
510 |
510 |
515 |
517 |
527 |
525 |
526 |
| Auto-Ignition Point °F |
742 |
751 |
750 |
758 |
765 |
764 |
765 |
| Pour Point °F |
-35 |
-35 |
-35 |
-20 |
-15 |
-15 |
-10 |
| Timken”OK” Load Kg |
45 |
45 |
45 |
45 |
45 |
45 |
45 |
| Copper Corrosion, 24 Hr |
1b |
1b |
1b |
1b |
1b |
1b |
1b |
| Demulsibility, 130°F, 30 min |
40/39/1 |
40/38/2 |
40/38/2 |
40/38/2 |
40/38/2 |
40/38/2 |
40/38/2 |
Posted on October 28th, 2007 by admin
Filed under: Lubrication
