Premium Quality Grease
BENEFITS
- Reduced Wear
- Reduced Drag
- Reduced Friction
- Reduced Downtime
- Extended Parts Life
- Increased Protection Against Heat
- Repels Water and has Excellent Rust Protection
- Consistent Working Temperature Range (- 30 F to + 500 F)
Advanced PPS Premium Quality Grease is a NLGI Grade 2. It is a calcium sulfonate complex. It has a wide temperature range, a very long life multi-purpose grease with exceptional water resistance and load bearing capability.
Advanced PPS Premium Quality Grease is a specially formulated high performance grease designed to handle high speeds over a wide temperature range.
It has proven to be a leader in bearing and suspension protection. Run through severe heat cycles, exposed to dirt, sand, water, and mud. This grease has survived and shown incredible results!
Compatibility with Advanced PPS Premium Quality Grease is not an issue. In most cases it is not necessary to purge existing grease from system.
APPLICATIONS
- Use Advanced PPS. Premium Quality Grease as the preferred lubricant, such as wheel bearings, kingpins, pivot points on equipment, high-speed bearings and pillow block bearings etc.
Material Safety Data Sheet
Download Material Safety Data Sheet PDF
| SECTION 1 | COMPANY IDENTIFICATION AND CHEMICAL PRODUCT |
| Company/Manufacturer Name: | Advanced Technology Lubricants, Inc. |
| Address: | 5889 Airport Road, Ste# 1426,Port Orange, FL 32128 |
| Phone / Fax: | Phone 386-322-1666 Fax 386-322-0509 |
| Trade Name: | Premium Quality Grease |
| Chemical Name: | Petroleum Hydrocarbon and Thickeners |
| Chemical Family: | Petroleum Hydrocarbon and Thickeners |
| Formula: | C15-C50 |
| CAS#: | Proprietary |
| Applications: | Premium Quality Grease is a wide temperature, very long life multi purpose grease with exceptional water resistance and load bearing capability. |
| SECTION 2 | COMPOSITION / INFORMATION ON INGREDIENTS | General: | This Product Is Non-Hazardous. This product contains No Known Carcinogens. No Special warning labels are required under OSHA 29 CFR 1910.1200 |
| FDA Statement: | N/A |
| SECTION 3 | HAZARDS IDENTIFICATION |
| Appearance: | Smooth, buttery, purple colored paste with faint hydrocarbon odor |
| Known Hazards: | This product is non hazardous No special warning labels are required under OSHA 29 CFR 1910.1200 |
| SECTION 4 | FIRST AID MEASURES |
| Eyes: | Flush with clean, lukewarm water (low pressure) occasionally lifting eyelids. Physician assessment if eyes are inflamed. |
| Skin: | Wash affected area thoroughly with soap and water. Wash contaminated clothing before reuse. |
| Inhalation: | Avoid breathing oil mists. Remove to fresh air. Give artificial respiration if not breathing. Get medical Attention. |
| Ingestion: | Do not induce vomiting. Force fluid. Has laxative effect. |
| SECTION 5 | FIRE FIGHTING MEASURES |
| Flash Point: | 455 degrees Fahrenheit |
| Flammable Limits: | N/A |
| Auto Ignition Temp: | N/A |
| Fire & Explosive Hazards: | Low Fire Hazard. Do not cut, drill, or weld empty containers |
| Extinguishing Media: | Dry chemical foam, water spray, carbon dioxide for small fires |
| Fire Fighting Procedures: | Cover with extinguishing agent, use water spray to cool fire exposed containers & as a protective screen. Do not point water stream directly into burning fluid to avoid spreading. |
Technical Data
Thickener Type: Calcium Sulfonate Complex NLGI Grade: 2
Texture: Smooth/Tacky
Color: Purple
Brief Product Description:
Premium Quality Grease is formulated to provide exceptional lubrication and protection in applications where heat, pressure, wear and corrosion are areas of priority concerns.
| TEST METHOD | TYPICAL RESULT | ASTM |
| Penetration 0 Strokes, 25C, dmm | D217 mod |
282 |
| Penetration 10K, Strokes, 25C,dmm | D217 mod |
287 |
| Penetration 100K Strokes, 25C, dmm | D217mod |
290 |
| Dropping Point, degrees, C | D2265 |
299 |
| Timken OK Load, 10 minutes, lbs. | D2509 |
85 |
| Four Ball EP Weld, kgf | D2596 |
650 |
| Four Ball Load Wear Index, kgf | D2596 |
70 |
| Four Ball Scar Diameter | D2596 |
.36 |
| DI Rust Protection, 48hr/125F | D1743 |
PASS |
| Water Washout, 1hr/79C,% | D1264 |
2.7 |
| Wheel Bearing Leakage, 20hr, 160C, 1000rpm |
D4290 |
0.5 |
| Oil Separation: Pressure Bleed, 24hr,/0.25psi/25 |
D1742 |
0.2 |
| Shell Roll Stability, 2hr,20-35C% | D1831 |
5 |
| Oil Viscosity, 40C, cSt | D445 |
110 |
| Oil Viscosity, 100C, cSt | D445 |
12.1 |
| Oil Viscosity, 100F, SUS | D2161 |
576 |
| Oil Viscosity, 210F, SUS | D2161 |
68 |
| Viscosity Index | D2270 |
|
| Viscosity Index | D2270 |
97 |
| Flash Point, COC, mF | D92 |
480 |
| Pour Point, C | D97 |
-15 |
Posted on October 28th, 2007 by admin
Filed under: Lubrication
